GHSZ320/330-72 Mono-crystalline White gridded and framed module
They are appropriate for agriculture-fishery-PV complementary projects.The conversion efficiency is up to 17.0% (mono).The maximum voltage acceptable to the system is up to 1500V.The maximum annual attenuation is 0.5%. The bearable wind pressure and snow pressure are respectively up to 3,800 Pa and 5,400 Pa.The product warranty lasts 12 years while the linear power warranty is 30 years long.The adoption of double-sided glass enhances aging resistance.
EFFICIENCY
1.Low voltage-temperature coefficient allows higher Power output at high-temperature condition
2.High efficient, high reliable solar cells ensure our Product meets output stability.
MATERIALS
1.Advanced EVA encapsulation system with Triple-layer back sheet meets the most stringent safety requirements for high-voltage Operation.
2.The sturdy, anodized aluminum frame allows The modules to be mounted on a variety of standard Racking systems to withstand harshest of European conditions
3.Ultra reliable bypass diodes prevent damage through Overheating due to shaded or defective cells.
4.Innovative, environmentally friendly packing method Using pile-edges insures modules arrive in perfectCondition.
5.New frame design incorporating Drainage holes, with more grounding holes, provide Flexible installation and use
BENEFITS
1.Manufactured IEC61215, IEC61730, ISO 9001:2008 MCS, TUV, CE
2.High efficiency, high safety, high reliability
3.Output power tolerance of -3%-+3 %
4.1O years Fully Backed CHN Insurance Product Warranty.
5.Standard 25-years Limited warranty on Power output, 3-years Product Warranty. Limited warranty on materials
and workmanship
6.Container load: 600pcs on 24 pallets in 40’ container and 140 pcs on 5 pallets in 20’ container.
NOTE
This publication summarizes product warranty and specifications, which are subject to change without notice, additional information may be found on our web site: www.htwindsolarpower.com
Module Characteristics
Note: the specifications are obtained under the Standard Test Conditions (STC):1000W/ m² solar irradiance, 1.5 Air Mass, and cell temperature of 25Degrees C
| Specification
Model Characteristics |
Module Number
GHSZ320/330-72 |
|
|
Open circuit voltage (V) |
45.11 |
45.2 |
|
Maximum power voltage (V) |
36.57 |
36.8 |
|
Short circuit current (A) |
9.31 |
9.55 |
|
Maximum power current (A) |
8.75 |
8.97 |
|
Maximum power (Wp) |
320Wp |
330Wp |
|
Cell Efficiency(%) |
16.5% |
17.00% |
|
Cell |
Poly-crystalline Silicon Solar Cells 156mm x 156mm |
|
|
Number of cells (Pcs) |
72(6*12) |
|
|
Size of module (mm) |
1960×990×40mm |
|
|
Weight per piece (kg) |
22.1 |
|
|
Limits Operation Temperature |
`-40C——+85 degree C | |
|
Maximum system voltage (V) |
1000V DC |
|
| Temperature & Coefficients
NOCT (nominal operating cell temperature) |
45 Degrees C + – 2 Degrees C |
|
|
Current Temperature Coefficient |
% / k |
0.06 + – 0.01 |
|
Voltage Temperature Coefficient |
Mv / k |
- (155+ – 10) |
|
Power Temperature Coefficient |
% / k |
-(0.5+- 0.05) |
| Output
Type of output Terminal |
||
|
Junction Box PV-JB001( TUV ) |
||
|
Cable |
LAPP (4.0mm2) |
|
|
Symmetrical Length |
900mm |
|
|
Connection |
MC4/ TYPE 1V |
|
